After moving a lock to Homebase you will activate fobs for that lock in the Homebase Community Manager.
This is a two-step process:
Assign the fob in the Community Manager
Use No Tour with the key fob scanner OR Update key fob access within the app
Step 1: Assign the fob in the Community Manager
Use the same credentials you use for the Mobile Manager to log into the Community Manager here:
Select Devices from the top menu and confirm that the lock was successfully added.
Select the unit the lock was assigned to from the unit list on the left.
Click on the resident's name listed under the Current Lease section in the top center of the page.
Scroll down to the Key Fobs & Passes section.
Enter the last 5 digits of the fob serial number and select that number from the dropdown list. (if the last 5 digits begin with "0" only enter the last 4 digits"
Select Save and Done.
Step 2: No Tour OR Update key fob access
No Tour functionality is available for buildings that want a hotel-like experience. No Tour transfers key fob data to the lock digitally and does not require updating key fob access at the lock using the Mobile Manager.
Scan the assigned key fob using the MT20W - wait for 3 green beeps
This puts lock information into the no tour sector data and will update the lock when the fob is presented.
Present the lock to the unit and confirm activation.
Update the lock
Go to the unit lock and log into the Mobile Manager.
Stand in front of the lock (Bluetooth range is less than 10 feet from the lock)
On the Access page select the lock.
On the lock's page scroll down to Update Key Fob Access
Wait for the lock to connect and update.
After the lock has successfully update test the assigned fobs to ensure they've been activated for that lock.
If they are not working, try engaging the lock, updating the lock again, and confirming the correct fob number was entered into the correct unit in the Community Manager.