For exterior door and secure community spaces managed by Brivo you can use the Homebase Community Manager to manage fobs for your residents and staff. 

To assign access to any Brivo controlled locks 

Log into the Community Manager and navigate to the Unit of the resident you'd like to assign a fob to. 

Click on the resident's name

Click on Assign Fob

Select an unassigned fob or card from your stock of extra credentials.  
(Homebase will provide you with a stock of extra fobs or cards when Homebase is launched at your property.) 

Enter the 4 or 5 digits associated with the fob or card serial number. If you are using a fob, this will be the last 4 or 5 digits of the long serial number. If you are using a card, this will be the 5 digits following the *. 

Once you've entered the number you must select the number from the dropdown list by clicking on the number with your mouse or keypad and hit Save.
Please Note: If you do not click on the fob number to select it from the dropdown list it will not save.
 

Select Save in the upper right hand corner of the entry field. You will see a 


To remove an assigned fob

To remove the fob assignment from this resident select the three blue dots at the top right of the Assigned Key Fob field. 

Select Remove Key Fob command that appears to un-assign this fob number from the resident. 

To manage fobs for Schlage Smart Locks see our guide here: 

How do I assign key fobs for Schlage Smart Locks?

Let us know if you have any questions.
We're here and happy to help!

Did this answer your question?